Blog·

Biomass map vs carbon stock map: what's the difference

A forested ridge and valley under a cloudy sky, with mountains extending into the distance.

If you've sat in a validation/verification review where one annex calls a raster "biomass" and the next annex calls the same pixels "carbon," you've already hit the thing that trips up a lot of project documentation: these are not the same product, and treating them as interchangeable is how methodology sections get flagged for clarification.

What an AGB layer is

An above-ground biomass (AGB) map is a regression output. Someone (a model, usually trained on field plots and allometric equations) relates canopy structure or spectral response to a biomass value, expressed in tonnes of dry matter per hectare. That's it. No carbon fraction has been applied yet. If you're reviewing a PDD or monitoring report and the units say Mg/ha of biomass, you're looking at the raw regression layer, not a stock figure.

This matters because the AGB layer is where the real measurement uncertainty lives. The regression ties pixel values (height, canopy cover, texture, whatever the sensor and model pick up) to a biomass estimate calibrated against ground plots. Everything downstream, the carbon number, the CO2e figure, the credit count, inherits whatever error is baked into that regression. A reviewer who only looks at the final carbon stock table and never asks what AGB model and plot network sit underneath it is skipping the part of the chain that determines defensibility.

Where the carbon stock map comes from

A carbon stock map is the AGB layer after two conversions get applied. First, a carbon fraction of dry matter, often the IPCC default of 0.47, though project-specific or species-specific values show up in better-documented projects, converts biomass tonnes to carbon tonnes. Second, if the reporting goes to CO2e (most registry outputs do), that carbon figure gets multiplied by 44/12, the molecular weight ratio of CO2 to carbon.

So: AGB (Mg/ha) × carbon fraction = carbon stock (Mg C/ha) × 44/12 = tonnes CO2e. Two multiplications, two places where an assumption can either match the project's forest type or quietly misstate it.

There's a third wrinkle most above-ground-only comparisons skip: below-ground biomass. Carbon stock accounting under most standards (VCS/Verra methodologies, CDM, most national forest inventories) includes a root-to-shoot ratio applied to the AGB figure to estimate below-ground biomass before the carbon fraction gets applied to the combined pool. Dead wood and litter pools are sometimes added on top, depending on the methodology's conservativeness requirements. None of that comes from the satellite layer. It's a lookup table applied afterward, and it's exactly the kind of assumption a technical reviewer needs stated explicitly, not buried in a footnote.

Why the distinction matters for reporting

A biomass map and a carbon stock map answer different audit questions. The biomass map answers: "does this remote-sensing product track structural change on the ground, and can it be refreshed without re-flying field plots every cycle?" The carbon stock map answers: "given that biomass figure, what carbon fraction, root-shoot ratio, and pool-inclusion decisions turned it into a reportable stock, and are those decisions consistent with the methodology the project is registered under?"

Conflating the two in a monitoring report muddies both answers. A reviewer who sees only the final CO2e number can't tell whether a change in reported credits came from a shift in forest structure itself (the AGB layer moved) or from a change in conversion assumptions (someone swapped the carbon fraction or root-shoot ratio between reporting periods). Keeping the AGB layer and the applied conversion factors documented separately, and refreshed on the same annual cycle, is what lets a reviewer trace a number back to its source instead of taking the stock figure on faith.

If your project is still running a fresh field-plot campaign every monitoring cycle just to refresh the biomass layer underneath these conversions, an annual regression layer like the one Biomass Mapping builds from wide-swath multispectral imagery gives you a repeatable AGB base to apply your own carbon fraction and pool assumptions to, cycle over cycle, without the re-flight.

Check how your project documents the AGB-to-carbon conversion before your next monitoring report goes out.